Updates for your mobee® 360 software will be available from 20.10.2026 The following updates are available. The release also includes new features such as the my mobee® Action Plan Developer and the recording of Body circumferences in the module TANITA PRO.
Click on my mobee® or click on TANITA PRO to go straight to that section.
01 | NEW: Features and modules
my mobee®: From training planner to action planner
With this latest release, the software’s existing training planner will be cross-thematic action planner expanded. In addition to exercises, it will also be possible in future to Courses, consultations, general advice and breathing exercises be incorporated into personalised plans. There are eight health topics in total – ranging from flexibility and back health, through to stress and endurance, to metabolism and body composition.
In addition to the well-known exercise recommendations, there are new, scientifically based recommendations are available. Users can also add their own content for all types of activities, organise it by topic and objective, and save their preferred recommendations as favourites. In addition, the device-based Exercise catalogues in collaboration with partners updated.
📫 A detailed look at the features and capabilities of the new Action Planner You’ll find this in our next newsletter.
TANITA PRO: Body measurements complement BIA
Module: TANITA PRO
Version: 2.8.0.0
The latest release includes a supplementary Submission and assessment from manually measured body circumferences.
The scope of Chest, arms, legs, waist and hips are categorised and assessed using a traffic-light system, depending on the availability of reference values. Trends can be plotted, which is particularly relevant in the field of targeted weight management. The combination of TANITA BIA analysis and cost-effective circumference measurement enhances and complements the functionality and interpretability of the results.
Image: Body proportions – chest, arms and legs
Image: Body proportions: waist to hips
Image: Body proportions gradient
Further changes: New additions to the age-appropriate assessment and evaluation include the BMI reference values for children and adolescents aged 5–19.
In the software settings, you will in future be able to choose between age-independent BMI reference values (according to the WHO) and age-specific BMI reference values (Age: 5–19 years, f/m; Age: >19 years, m/f).
02 | AMENDED: Optimisations and workflows
| Module: mobee® 360 Cockpit Version: 2.6.6.0 | Optimised VitalScore Presentation and direct display of cross-thematic analysis reports |
Description: The VitalScore The display has been optimised: Scored sections are shown before those without a score. Furthermore, once a cross-topic analysis report has been generated, it is displayed directly in the document archive to speed up the workflow.
| Module: mobee® fit/ S3 CHECK Pro Version: 4.0.4.0 / 2.4.6.0 | Expansion and reorganisation of equipment-based training systems |
Description: The device-based Exercise catalogues will take centre stage in the new Action Plan Developer available in my mobee®. For offline use, selected exercises will remain available in the desktop software.
| Module: mobee® care Version: 2.4.6.0 | Optimised device connectivity for the mobee® analyser |
Description: Connecting the mobee® analyser has been simplified. From now on, configuration will be carried out centrally in the mobee® fit settings and will be applied to mobee® care.
03 | TECHNICAL ADJUSTMENTS
| Module: mobee® 360 Basic Module Version: 4.8.8.0 | Integration of Open Authorisation (OAuth) in the mobee® 360 email configuration |
Description: Some major email providers are increasingly restricting the ability to send emails using stored SMTP credentials, or no longer support this feature. With OAuth A secure, modern login method is available, which enables emails to be sent from mobee® 360 even if there are future changes to email providers. Initially, this change applies to Microsoft accounts available. Other providers such as Google/Gmail will be rolled out gradually due to differences in technical interfaces.
| Module: mobee® metabolic/ Stress Pilot® Pro/ mobee® scale (Anthrop) Version: 1.6.8.0 / 3.6.0.0 / 3.4.8.0 | Improved data exchange for GDT/TheDex exports with enhanced filename validation |
Description: Data exchange with other systems has been expanded: all products now support the export of printouts via the GDT/THEDEX-interface. This means, for example, that reports can be exported as PDF files to connected third-party systems even where no such interface was previously available.
Problematic special characters and control characters are automatically detected and replaced, which prevents faulty file or folder structures and enhances cybersecurity during data exchange.
| Module: mobee® metabolic Version: 1.6.8.0 | Plausibility check of the O₂/CO₂ calibration factors |
Description: An additional plausibility check has been added to the sensor calibration process. The calibration values entered are now automatically checked to ensure they fall within a permissible range. Values outside this range can no longer be saved. Instead, a message appears indicating that the calibration must be checked or carried out again. This reduces the risk of incorrect calibration values and the Reliability improved the subsequent measurements.
| Module: mobee® metabolic Version: 1.6.8.0 | Important update and user notice following a change in the supplier of O₂ replacement sensors |
Description: In the settings, you will in future be able to select the type of sensor used. The default values set for sensor replacement (every 9 months) and sensor calibration (every 2 weeks) will apply to new Envitec-Sensors are automatically calibrated and displayed.
From 1 October 2026, CORTEX will switch to Envitec O₂ sensors with the part number 000-45-016; the Teledyne sensors used to date have been discontinued by the supplier and are no longer available. Existing Teledyne sensors may continue to be used until the end of their service life.
Envitec O₂ sensors have a shorter service life (replacement recommended after 9 months at the latest, instead of the previous 18 months) and a revised calibration interval (every two weeks) – applies to (MetaLyzer® 3B-R3 and MetaMax® 3B).
All MetaLyzer® 3B-R3 systems with a 10-digit serial number must also be updated to firmware version 2.00.03 or later.
| Module: Stress Pilot® Pro Version: 3.6.0.0 | Enhanced support for POLAR H10 |
Description: More recent POLAR H10 Sensors use a modified Bluetooth pairing mechanism. As a result, it has not previously been possible to connect reliably to these devices. The connection process has been adjusted and is now Compatible with new and older H10 sensors.
04 | INSTALLATION AND SUPPORT
Availability: from 20 October 2026
Installation effort: Please allow at least 15-20 minutes for the installation.
Are you already using the installation, licensing and activation wizard in your my mobee® Business Portal? Do you need help with installation, set-up and getting started? Book a 20-minute online set-up session – we’ll guide you through the process.
→ Setup assistance
How do I get the update?
As a customer with a valid service contract, you automatically benefit from the numerous improvements and new features. To use the new action planner in my mobee®, you must have at least one service contract under the M tariff. If your service contract has expired or you are interested in upgrading to our Premium tariff, please feel free to contact the mobee Sales Team.
→ Contact request
Our new software versions will automatically notify you of the update. For older versions, the update can be manually initiated from the software settings. Please ensure your PC is connected to the internet while the update is being performed.